How to export Sprint Layout PCB to gerber files

1. Here is the main interface of Sprint Layout. 

2. Click File -> Open your PCB(.lay6) file in  Sprint Layout .

3. Photoview of the PCB

4. Exporting the PCB from Sprint Layout .lay6 format to Gerber

5. Gerber Export parameters. 
You can select these options as shown in the below image, then click Create Gerber files...
(LED_Flower = project name)

Created files:

23.09.2018 0:16:57

------------------------------------------------

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_copper_top.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_copper_bottom.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_silkscreen_top.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_silkscreen_bottom.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_outline.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_soldermask_top.gbr

-> D:\TORRENTs\Sprint Layout for JLCPCB\PCBs examples\LED Flower\LED_Flower_soldermask_bottom.gbr

------------------------------------------------

7 files created.

6. Drill data (Excellon) export parameters

7. You can make one Drilling file or separated with and without metallization.

8. Save Drilling data file

9. Make ZIP file with all Gerber files and upload the zip file to JLCPCB order page.

Still need help? Contact Us Contact Us